-
Magnetic Receiver
Catalogue No: 2051600
For retrieving the magnetic stirring bars from a solution.
Comprises a strong magnet coated with polypropylene.
Shaped in the form oF x Long handle with an integrated annular ring at one end.
* Magnetic ReceiverLogin to see prices -
Micro Pestle
Catalogue No: 2065710
This is a double ended pestle moulded from polypropylene.
* for 0.5 and 1.5ml MCTLogin to see prices -
Stirring Rods, Policemen
Catalogue No: 2066530
This is, in fact, a multipurpose product made of polypropylene, designed in the form of circular rods with flat ends, thus enables its use as stirrer as well as spatula.
The two different shaped flattened ends of this rod form two small spatulas.
Available in size 245x6mm (length x diameter).
* Stirring Rods, PolicemenLogin to see prices -
Test Tube With Screw Cap
Catalogue No: 2067500
Excellent contact clarity. Autoclavable. With screw cap on tube, which makes it usable by filling it up to top.
Provide excellent option for RIA, coagulation and bacteriology etc. Size (height x diameter) 100 x 16mm.
* Test Tube With Screw CapLogin to see prices -
Separating Funnel Holder
Catalogue No: 2070960
This non-corrosive separating funnel holder has a front opening for clear view of the solution.
Provided with two tapered wedges to ensure firm grip on rods of diameters from 9.5 to 12.5mm.
* Separating Funnel HolderLogin to see prices -
Draining Rack
Catalogue No: 2071980
Useful for post wash draining of tubes and bottles in laboratory.
Total of 20 pegs are mounted by screw-nut into the back plate.
A bottom plate is provided as drain water collector from which the collected water can be transferred into a container with the help of drain tube.
Non-corrosive, and non staining body.
* Draining RackLogin to see prices -
Flask Stand
Catalogue No: 2072200
Facilitates holding of round bottom flask.
Ribbed step providing stair-like structure and gives excellent support to the roundbottom flask.
Can easily holds flask up to 10L Cap.
This stackable stand can also be steam autoclaved.
* Flask StandLogin to see prices -
Pipette Box
Catalogue No: 2072220
Completely made of polypropylene, this cylindrical shaped, two part, pipette case is specially designed to hold pipettes of different lengths.
The top of the case screws on to the bottom and the total available height can be adjusted by screwing or unscrewing the top to the desired level.
* Pipette BoxLogin to see prices -
Pipette Stand, Horizontal, Polypropylene
Catalogue No: 2072320
Completely detachable stand, moulded in polypropylene, is totally non-corrosive and unbreakable, and can hold a total of 12 pipettes, 6 on each side.
This autoclavable stand has two sides attached to each other through three metallic rods coated with polypropylene.
* Pipette Stand, Horizontal, PPLogin to see prices -
Pipette Stand, Vertical, Heavy, PP
Catalogue No: 2072360
Stable, non-corrosive, detachable stand with heavy base, which can hold maximum
of 28 pipettes of up to 14mm diameter.
The base size approx. 225mm in diameter and a polypropylene coated square rod
about 375mm long is mounted on to the base.
This rod carries two discs, upper one has holes for holding pipettes and lower one
has holes for supporting tips of the pipettes from where liquid drains out to the base.
The distance between both the discs is adjustable according to length of the pipette.
* Pipette Stand, Vertical, Heavy, PPLogin to see prices -
Pipette Stand, Vertical, Light, PP
Catalogue No: 2072400
Moulded in polypropylene, the stand holds maximum of 94 pipettes and is rotatable on a central vertical axis for pipette selection.
The lower disc has four concentric troughs with tapered sides and open bottoms, which holds the pipette tips securely and allows the liquid drops to run off.
The upper disc has grid pattern that corresponds to the bottom disc and keeps pipettes vertical.
Stand can be easily assembled and disassembled.
* Pipette Stand, Vertical, LightLogin to see prices -
Test Tube Stand, Plastic
Catalogue No: 2072580
A single piece, moulded plastic test tube stand has 2 rows of 6 holes each to take up to 12 test tubes x 4 holes of about 25mm diameter and 8 holes of 16mm Dia. also has five vertical pegs for draining.
The single piece moulding makes it long-lasting and durable.
* Test Tube Stand, PlasticLogin to see prices -
Test Tube Stand, Round, PP
Catalogue No: 2072600
Handy, space saving, round shape, made of polypropylene, for 12 tubes x 4 of 25mm diameter and 8 of 19mm diameter through the holes on the top plate, which is supported on bottom plate through 4 vertical pins.
The base has recesses corresponding to the holes in the top plate, 16 vertical pegs for drying test tubes and is surrounded by a trough shape to contain drippings.
This autoclavable stand can be easily disassembled for cleaning.
* Test Tube Stand, RoundLogin to see prices -
Pcr Tube Rack
Catalogue No: 2072660
Useful for keeping PCR tubes. Top and base of the rack are made of tough and transparent polycarbonate, while the middle portion is of moulded polypropylene.
The rack has tube holding spaces uniformly placed so as to facilitate the use of multi-pipettes.
A number of racks can be stacked together to save shelf space.
The rack has Cap. to take up to 96 tubes of 0.2mL each.
* PCR Tube RackLogin to see prices -
Universal Multi Rack
Catalogue No: 2072720
The rack is designed to be compatible with wide range of tube diameters.
This rectangular shaped rack has holes on all the four sides to take tubes of diameters 30mm, 20mm, 17mm and 12mm respectively.
* Universal Multi RackLogin to see prices